Large Accent Long Cowl for Glare Reduction in Bronze - This large cowl for the 5111 Accent Light reduces glare by increasing the cutoff angle for light. Available in Bronze or Brass replaces existing medium cowl that comes installed on factory Accent Lights. - Bronze - Landscape Lighting - Accessories - Mounting Accessory - Contemporary - Collection: WAC Landscape - Material: K-Alloy Aluminum - Reversible: No - Height: 3.58" - Length: 8" - Width: 3.58" - Available in a bronze finish. - K-Alloy Aluminum and Solid Brass construction (BBR) offers enhanced protection against outdoor elements. - Replaces medium cowl on 5211 Large accent lights. - Thumb screw included to hold cowl into place. - 8 inches long. - Standards: UL & cUL 1838 and IP68 Rated for Wet and Submersible Locations. Light Fixture
3.5W - LED Horizontal Scoop Step and Wall Light 120V 3000K in Black - WAC Lighting Step and Wall Lights are designed to seamlessly blend into any architecture featuring a sleek interchangeable magnetic faceplate with no visible hardware. These luminaires offer enhanced energy efficient functionality and optimized light output to adequately illuminate stairs walls and walkways with little or no glare. Light engine is IP66 sealed for both indoor and outdoor applications. - Black - Landscape Lighting - Outdoor Wall Lighting - Step and Wall Lights - Contemporary - Collection: WAC Landscape - Material: Die Cast Aluminum - Height: 3.13" - Length: 1.75" - Width: 5" - Die-cast aluminum construction in multiple finishes. Marine grade rated stainless steel (SS finish lifetime warranty) is recommended for coastal environments. Magnetic faceplate installation with tamper proof non-visible hardware. - "Available in 120V, or 277. Direct wiring for 120V or 277V, no driver necessary. CEC Title 24 Compliant in 120V." - "Wet location rated to IP66 standards for indoor and outdoor installations, No UV or heat radiation. Brushed Nickel finishes are only for interior use." - Smooth and continuous ELV dimming to 10% with an Electronic Low Voltage dimmer. - "Replaceable LED Module available in multiple color options (Blue, Red, Amber), Power Consumption: 3.5W, CRI: 90, 50,000 hours rated life." - "Standards: ETL &c ETL Listed. Fits into 2” × 4” J-Box with minimum inside dimensions of 3""L × 2""W × 2""D." - Bulb Type: LED - Bulb Base: LED Module - Number Bulbs: 1 - Watts Per Bulb: 3.5 - Bulb(s) Included: Yes - Dimmable: Yes - Voltage: 120V - Color Temperature: 3000K - CRI: 90 - Lumens: 68 - Delivered Lumens: 4 - Beam Spread: Flood Degree - Lifetime: 50000 Hour Light Fixture
3.5W - LED Horizontal Scoop Step and Wall Light 120V 3000K in Bronze - WAC Lighting Step and Wall Lights are designed to seamlessly blend into any architecture featuring a sleek interchangeable magnetic faceplate with no visible hardware. These luminaires offer enhanced energy efficient functionality and optimized light output to adequately illuminate stairs walls and walkways with little or no glare. Light engine is IP66 sealed for both indoor and outdoor applications. - Bronze - Landscape Lighting - Outdoor Wall Lighting - Step and Wall Lights - Contemporary - Collection: WAC Landscape - Material: Die Cast Aluminum - Height: 3.13" - Length: 1.75" - Width: 5" - Die-cast aluminum construction in multiple finishes. Marine grade rated stainless steel (SS finish lifetime warranty) is recommended for coastal environments. Magnetic faceplate installation with tamper proof non-visible hardware. - "Available in 120V, or 277. Direct wiring for 120V or 277V, no driver necessary. CEC Title 24 Compliant in 120V." - "Wet location rated to IP66 standards for indoor and outdoor installations, No UV or heat radiation. Brushed Nickel finishes are only for interior use." - Smooth and continuous ELV dimming to 10% with an Electronic Low Voltage dimmer. - "Replaceable LED Module available in multiple color options (Blue, Red, Amber), Power Consumption: 3.5W, CRI: 90, 50,000 hours rated life." - "Standards: ETL &c ETL Listed. Fits into 2” × 4” J-Box with minimum inside dimensions of 3""L × 2""W × 2""D." - Bulb Type: LED - Bulb Base: LED Module - Number Bulbs: 1 - Watts Per Bulb: 3.5 - Bulb(s) Included: Yes - Dimmable: Yes - Voltage: 120V - Color Temperature: 3000K - CRI: 90 - Lumens: 68 - Delivered Lumens: 4 - Beam Spread: Flood Degree - Lifetime: 50000 Hour Light Fixture
3.5W - LED Horizontal Scoop Step and Wall Light 120V 3000K in White - WAC Lighting Step and Wall Lights are designed to seamlessly blend into any architecture featuring a sleek interchangeable magnetic faceplate with no visible hardware. These luminaires offer enhanced energy efficient functionality and optimized light output to adequately illuminate stairs walls and walkways with little or no glare. Light engine is IP66 sealed for both indoor and outdoor applications. - White - Landscape Lighting - Outdoor Wall Lighting - Step and Wall Lights - Contemporary - Collection: WAC Landscape - Material: Die Cast Aluminum - Height: 3.13" - Length: 1.75" - Width: 5" - Die-cast aluminum construction in multiple finishes. Marine grade rated stainless steel (SS finish lifetime warranty) is recommended for coastal environments. Magnetic faceplate installation with tamper proof non-visible hardware. - "Available in 120V, or 277. Direct wiring for 120V or 277V, no driver necessary. CEC Title 24 Compliant in 120V." - "Wet location rated to IP66 standards for indoor and outdoor installations, No UV or heat radiation. Brushed Nickel finishes are only for interior use." - Smooth and continuous ELV dimming to 10% with an Electronic Low Voltage dimmer. - "Replaceable LED Module available in multiple color options (Blue, Red, Amber), Power Consumption: 3.5W, CRI: 90, 50,000 hours rated life." - "Standards: ETL &c ETL Listed. Fits into 2” × 4” J-Box with minimum inside dimensions of 3""L × 2""W × 2""D." - Bulb Type: LED - Bulb Base: LED Module - Number Bulbs: 1 - Watts Per Bulb: 3.5 - Bulb(s) Included: Yes - Dimmable: Yes - Voltage: 120V - Color Temperature: 3000K - CRI: 90 - Lumens: 68 - Delivered Lumens: 4 - Beam Spread: Flood Degree - Lifetime: 50000 Hour Light Fixture
3.5W - LED Horizontal Louvered Step and Wall Light 120V 3000K in Black - WAC Lighting Step and Wall Lights are designed to seamlessly blend into any architecture featuring a sleek interchangeable magnetic faceplate with no visible hardware. These luminaires offer enhanced energy efficient functionality and optimized light output to adequately illuminate stairs walls and walkways with little or no glare. Light engine is IP66 sealed for both indoor and outdoor applications. - Black - Landscape Lighting - Outdoor Wall Lighting - Step and Wall Lights - Contemporary - Collection: WAC Landscape - Material: Die Cast Aluminum - Height: 3.13" - Length: 1.75" - Width: 5" - Die-cast aluminum construction in multiple finishes. Marine grade rated stainless steel (SS finish lifetime warranty) is recommended for coastal environments. Magnetic faceplate installation with tamper proof non-visible hardware. - "Available in 120V, or 277. Direct wiring for 120V or 277V, no driver necessary. CEC Title 24 Compliant in 120V." - "Wet location rated to IP66 standards for indoor and outdoor installations, No UV or heat radiation. Brushed Nickel finishes are only for interior use." - Smooth and continuous ELV dimming to 10% with an Electronic Low Voltage dimmer. - "Replaceable LED Module available in multiple color options (Blue, Red, Amber), Power Consumption: 3.5W, CRI: 90, 50,000 hours rated life." - "Standards: ETL &c ETL Listed. Fits into 2” × 4” J-Box with minimum inside dimensions of 3""L × 2""W × 2""D." - Bulb Type: LED - Bulb Base: LED Module - Number Bulbs: 1 - Watts Per Bulb: 3.5 - Bulb(s) Included: Yes - Dimmable: Yes - Voltage: 120V - Color Temperature: 3000K - CRI: 90 - Lumens: 68 - Delivered Lumens: 36 - Beam Spread: Flood Degree - Lifetime: 50000 Hour Light Fixture
3.5W - LED Horizontal Louvered Step and Wall Light 120V 3000K in Bronze - WAC Lighting Step and Wall Lights are designed to seamlessly blend into any architecture featuring a sleek interchangeable magnetic faceplate with no visible hardware. These luminaires offer enhanced energy efficient functionality and optimized light output to adequately illuminate stairs walls and walkways with little or no glare. Light engine is IP66 sealed for both indoor and outdoor applications. - Bronze - Landscape Lighting - Outdoor Wall Lighting - Step and Wall Lights - Contemporary - Collection: WAC Landscape - Material: Die Cast Aluminum - Height: 3.13" - Length: 1.75" - Width: 5" - Die-cast aluminum construction in multiple finishes. Marine grade rated stainless steel (SS finish lifetime warranty) is recommended for coastal environments. Magnetic faceplate installation with tamper proof non-visible hardware. - "Available in 120V, or 277. Direct wiring for 120V or 277V, no driver necessary. CEC Title 24 Compliant in 120V." - "Wet location rated to IP66 standards for indoor and outdoor installations, No UV or heat radiation. Brushed Nickel finishes are only for interior use." - Smooth and continuous ELV dimming to 10% with an Electronic Low Voltage dimmer. - "Replaceable LED Module available in multiple color options (Blue, Red, Amber), Power Consumption: 3.5W, CRI: 90, 50,000 hours rated life." - "Standards: ETL &c ETL Listed. Fits into 2” × 4” J-Box with minimum inside dimensions of 3""L × 2""W × 2""D." - Bulb Type: LED - Bulb Base: LED Module - Number Bulbs: 1 - Watts Per Bulb: 3.5 - Bulb(s) Included: Yes - Dimmable: Yes - Voltage: 120V - Color Temperature: 3000K - CRI: 90 - Lumens: 68 - Delivered Lumens: 36 - Beam Spread: Flood Degree - Lifetime: 50000 Hour Light Fixture
10W - 18in LED Light Bar with 3 CCT Selectable 2700K 3000K 3500K and On/Off/50% Rocker Switch in White - WAC line voltage light bars feature 3 CCT selectable technology that allows you to toggle between 2700K 3000K 3500K with quality illumination for all tasks. A slightly recessed reflector creates a high uniformity of light with complete elimination of glare. Minimal spacing between diffusers enables a visually seamless line of illumination when connecting multiple units end to end. - White - Task & Cove - Bar Light - Bar Light - Functional - Collection: Light Bar - Material: Extruded Aluminum - Reversible: Yes - Height: 3.228" - Length: 1.89" - Width: 21.26" - "Construction: Extruded aluminum with Acrylic Diffuser. Available in 8in, 18in, 24in, and 30in sized for cabinets of any size. Can be hardwired from inside the light bar, or powered through a 6ft plug-and-play grounded power cable (BA-PC) sold separately." - Slightly recessed reflector creates a high uniformity of light with complete elimination of glare. Includes an I-connector to install multiple light bars end to end. - "Includes male and female quick connect jacks on each side to allow for seamless end to end connection or interconnect joiner cables (BA-IC) available in 6in, 12in, 24in, and 36in lengths." - Smooth and continuous dimming with an electronic low voltage (ELV) or TRIAC dimmer. Three way rocker switch for on/off/50% brightness toggle. - "High Powered LED Module with CRI: 90, Rated Hours: 50000, Tri-CCT Selectable from switch: 2700K, 3000K, or 3500K, up to 1075 delivered lumens." - Standards: ETL & cETL listed for Damp Locations. CEC Title 24 Compliant. - Bulb Type: LED - Bulb Base: LED Module - ACLED Module - Number Bulbs: 1 - Watts Per Bulb: 10 - Bulb(s) Included: Yes - Dimmable: "ELV, TRIAC" - Voltage: 120V - Color Temperature: 2700-3000-3500K - CRI: 90 - Lumens: 750 - Delivered Lumens: 600 - Beam Spread: Flood Degree - Lifetime: 50000 Hour Light Fixture
InvisiLED 5ft Field Cuttable Aluminum Surface Mounted Deep Channel - Professional grade field cuttable 5ft Aluminum channel and clips for indoor InvisiLED tape light. Includes mounting hardware and a white acrylic diffuser. - Aluminum - Task & Cove - InvisiLED Tape Light - Aluminum Channels - Contemporary - Collection: InvisiLED Surface Mounted Channels - Material: Aluminum - Reversible: No - Height: 1" - Length: 0.69" - Width: 60" - Aluminum mounting channel with frosted white polycarbonate diffuser. - "Compatible with any WAC Lighting Lite, PRO, PRO II, PRO II, as well as RGB Color Changing systems." - "Perfect for eliminating the visibility of tape light, and diffusing LED diodes to reduce hot spots." - "Includes 5ft of channel, can be field cut to desired lengths with a hack or chop saw." - "Simple to install, all necessary mounting hardware is included. Additional mounting clips available for purchase: LED-T-CL3-PT, LED-T-CL2-PT (Adjustable clips for 50 Degree adjustment from center in either direction)." - Standards: UL and cUL Listed for damp locations. - Bulb Type: LED - Bulb Base: LED Module - Number Bulbs: 2 - Bulb(s) Included: No - Dimmable: Yes - Voltage: 24V Light Fixture
