I Connector for Line and Straight Edge - Connectors for WAC Lighting Line Line 2.0 and Straight Edge under cabinet fixtures. I connectors are used to join two fixtures for a seamless end to end connection. Jointer cables are used to join one fixture to another on a single power source available in four sizes 6in 12in 24in and 36in. Use an SL IF custom extender to create longer runs of joiner cables. Y and X connectors are used to create three way and four way connections. 144in extension cable is used to supply power to fixture from a far power supply. - White - Accessories - Line - Connector - Functional - Collection: Line - Material: Plastic - Reversible: Yes - Height: 0.88" - Length: 0.88" - Width: 0.25" - "An I-Connector is included with each WAC Lighting Line, Line 2.0, and Straight Edge fixture. This is an additional or replacement I-connector." - Easy to install for power continuity. - "To be used with WAC Lighting Line, Line 2.0, and Straight Edge under cabinet fixture." - Joins two fixtures with power continuity for an end to end connection. - "Connect up to a number of fixtures allowed by the power supply used. For example, 100Watt power supply can support 10 X 10Watt fixtures." - Standards: UL & cUL Listed for Damp Locations. - Voltage: 24V Light Fixture
I Can't Believe It's Not Recessed 4in to 6in Recessed Retrofit Kit - I Can't Believe it's Not Recessed imitates a traditional 6in recessed downlight without the need for installing a housing. Multiple high powered LED's illuminate an acrylic diffuser uniformly without socket shadows which are common in conventional ceiling lights. This multi purpose Damp Location listed and Energy Star Rated ceiling light can be mounted without a transformer in a standard 4in junction box. ADA Compliant CSA Listed and CEC Title 24 Compliant. - Nickel - Accessories - Ceiling Lighting - Flush Mount - Functional - Collection: Disc - Material: Aluminum - Reversible: No - Height: 6" - Length: 6" - Width: 0.5" - Retrofit Kit converts I Can't Believe It's Not Recessed into a recessed retrofit version. - Retrofit kit with includes an A19 socket set for an easy no-wire installation. - "Retrofit kit is designed to fit into an existing 4"", 5"" or 6"" recessed unit." - For use with part number FM-616-930. - "Retrofit kit is designed to fit into an existing 4"", 5"" or 6"" recessed unit. For use with part number FM-616-930." - Standards: ETL & cETL IP65 Wet Location Listed. Light Fixture
24in Extension Joiner Cable for Line Voltage Puck Light in Black - WAC line voltage puck lights feature 3 CCT selectable technology that allows you to toggle between 2700K 3000K 3500K with quality illumination for all tasks. Available in multiple finishes. Can be recessed or surface mounted and hardwired or installed with a plug and cord. Order a single puck or kits of multiple pucks to link together. - Black - Task & Cove - Button Light - 120V Puck Light Accessories - Functional - Collection: Line Voltage Puck Light - Material: Aluminum - Reversible: Yes - Height: 1.772" - Length: 1.772" - Width: 4.331" - Interconnect cables can be used to increase distance between puck lights. Available in white or black finish options. - Puck Lights can be purchased in four configurations with a maximum of up to 20 pucks per run. HR-AC70 - Single Light with single connector. HR-AC72 - Single light with double connector. HR-AC71 - Single light with single connector and 6ft power cord with roll switch. HR-AC73 - A kit consisting of 2 X HR-AC72 + 1 X HR-AC71. - "Interconnect cables can be purchased to increase distance between pucks. Joiner cables (HR-IC) are available in 12in, 24in, and 36in options." - "Smooth and continuous dimming with an electronic low voltage (ELV) or TRIAC dimmer. Dims down 10% with ELV dimmers, and 5% with TRIAC dimmers. " - Joiner cables can be used to increase length from power cable to puck light. - Standards: ETL & cETL listed for Damp Locations. CEC Title 24 Compliant. Light Fixture
24in Extension Joiner Cable for Line Voltage Puck Light in White - WAC line voltage puck lights feature 3 CCT selectable technology that allows you to toggle between 2700K 3000K 3500K with quality illumination for all tasks. Available in multiple finishes. Can be recessed or surface mounted and hardwired or installed with a plug and cord. Order a single puck or kits of multiple pucks to link together. - White - Task & Cove - Button Light - 120V Puck Light Accessories - Functional - Collection: Line Voltage Puck Light - Material: Aluminum - Reversible: Yes - Height: 1.772" - Length: 1.772" - Width: 4.331" - Interconnect cables can be used to increase distance between puck lights. Available in white or black finish options. - Puck Lights can be purchased in four configurations with a maximum of up to 20 pucks per run. HR-AC70 - Single Light with single connector. HR-AC72 - Single light with double connector. HR-AC71 - Single light with single connector and 6ft power cord with roll switch. HR-AC73 - A kit consisting of 2 X HR-AC72 + 1 X HR-AC71. - "Interconnect cables can be purchased to increase distance between pucks. Joiner cables (HR-IC) are available in 12in, 24in, and 36in options." - "Smooth and continuous dimming with an electronic low voltage (ELV) or TRIAC dimmer. Dims down 10% with ELV dimmers, and 5% with TRIAC dimmers. " - Joiner cables can be used to increase length from power cable to puck light. - Standards: ETL & cETL listed for Damp Locations. CEC Title 24 Compliant. Light Fixture
L Connector for InvisiLED 24V Tape Light in White - Connectors and accessories for WAC Lighting InvisiLED 24V Tape Light including LITE PRO PRO II PRO III and RGB Color Changing Task & Cove Tape Light. - White - Accessories - Tape Light - Connector - Functional - Collection: InvisiLED - Material: Plastic - Reversible: Yes - Height: 0.25" - Length: 1.39" - Width: 1.32" - L connector has male and female connectors. - Used to create 90° right angles. - Includes 3M construction grade adhesive sticker. - To be used in place of Tape Light L connectors. - "To be used with WAC Lighting InvisiLED 24V Tape Light including LITE, PRO, PRO II, PRO III, and RGB Color Changing Task & Cove Tape Light." - Standards: UL & cUL Listed for Damp Locations. - Voltage: 24V Light Fixture
36in Extension Joiner Cable for Line Voltage Puck Light in Black - WAC line voltage puck lights feature 3 CCT selectable technology that allows you to toggle between 2700K 3000K 3500K with quality illumination for all tasks. Available in multiple finishes. Can be recessed or surface mounted and hardwired or installed with a plug and cord. Order a single puck or kits of multiple pucks to link together. - Black - Task & Cove - Button Light - 120V Puck Light Accessories - Functional - Collection: Line Voltage Puck Light - Material: Aluminum - Reversible: Yes - Height: 1.772" - Length: 1.772" - Width: 4.331" - Interconnect cables can be used to increase distance between puck lights. Available in white or black finish options. - Puck Lights can be purchased in four configurations with a maximum of up to 20 pucks per run. HR-AC70 - Single Light with single connector. HR-AC72 - Single light with double connector. HR-AC71 - Single light with single connector and 6ft power cord with roll switch. HR-AC73 - A kit consisting of 2 X HR-AC72 + 1 X HR-AC71. - "Interconnect cables can be purchased to increase distance between pucks. Joiner cables (HR-IC) are available in 12in, 24in, and 36in options." - "Smooth and continuous dimming with an electronic low voltage (ELV) or TRIAC dimmer. Dims down 10% with ELV dimmers, and 5% with TRIAC dimmers. " - Joiner cables can be used to increase length from power cable to puck light. - Standards: ETL & cETL listed for Damp Locations. CEC Title 24 Compliant. Light Fixture
36in Extension Joiner Cable for Line Voltage Puck Light in White - WAC line voltage puck lights feature 3 CCT selectable technology that allows you to toggle between 2700K 3000K 3500K with quality illumination for all tasks. Available in multiple finishes. Can be recessed or surface mounted and hardwired or installed with a plug and cord. Order a single puck or kits of multiple pucks to link together. - White - Task & Cove - Button Light - 120V Puck Light Accessories - Functional - Collection: Line Voltage Puck Light - Material: Aluminum - Reversible: Yes - Height: 1.772" - Length: 1.772" - Width: 4.331" - Interconnect cables can be used to increase distance between puck lights. Available in white or black finish options. - Puck Lights can be purchased in four configurations with a maximum of up to 20 pucks per run. HR-AC70 - Single Light with single connector. HR-AC72 - Single light with double connector. HR-AC71 - Single light with single connector and 6ft power cord with roll switch. HR-AC73 - A kit consisting of 2 X HR-AC72 + 1 X HR-AC71. - "Interconnect cables can be purchased to increase distance between pucks. Joiner cables (HR-IC) are available in 12in, 24in, and 36in options." - "Smooth and continuous dimming with an electronic low voltage (ELV) or TRIAC dimmer. Dims down 10% with ELV dimmers, and 5% with TRIAC dimmers. " - Joiner cables can be used to increase length from power cable to puck light. - Standards: ETL & cETL listed for Damp Locations. CEC Title 24 Compliant. Light Fixture
0.33W - InvisiLED LITE 2" Tape Light in 2700K Warm White - Professional grade tape light that delivers optimal color consistency and brightness. An ideal system for task or accent lighting applications. - White - Task & Cove - InvisiLED Tape Light - Tape Light - Contemporary - Collection: InvisiLED LITE - Material: Silicone - Reversible: Yes - Height: 0.1" - Length: 0.25" - Width: 2" - "Flexible silicone cased tape light for enhanced damp location listing. Peel and stick 3M construction adhesive on back. Indicator marks every 2"" for field cutting." - "WAC Lighting tape light is available in four output options: Lite, PRO, PRO II, PRO II, as well as RGB Color Changing or PRO Outdoor 24V & 12V systems." - "24V remote and plug-in transformers (Sold Separately) allow for multiple runs of tape. Please refer to total wattage of transformer divided by wattage per strip of tape when creating a layout. 60 Watt Remote Transformer: EN-2460-RB2-T, 100 Watt Remote Transformer: EN-24100-RB2-T, Plug-in Transformer: EN-2460-P-AR-T." - Smooth and continuous dimming to 10% with an electronic low voltage (ELV) dimmer. - "High Powered LED: Color Temperature: 2700K or 3000K, Rated Hours: 50,000, up to 135 Lumens per foot, Voltage: 24V." - Standards: UL and cUL Listed for damp locations. - Bulb Type: LED - Bulb Base: LED Module - Number Bulbs: 1 - Watts Per Bulb: 0.33 - Bulb(s) Included: Yes - Dimmable: Yes - Voltage: 24V - Color Temperature: 2700K - CRI: 85 - Lumens: 21 - Delivered Lumens: 21 - Beam Spread: Flood Degree - Lifetime: 50000 Hour Light Fixture
0.33W - InvisiLED LITE 2" Tape Light in 3000K Soft White - Professional grade tape light that delivers optimal color consistency and brightness. An ideal system for task or accent lighting applications. - White - Task & Cove - InvisiLED Tape Light - Tape Light - Contemporary - Collection: InvisiLED LITE - Material: Silicone - Reversible: Yes - Height: 0.1" - Length: 0.25" - Width: 2" - "Flexible silicone cased tape light for enhanced damp location listing. Peel and stick 3M construction adhesive on back. Indicator marks every 2"" for field cutting." - "WAC Lighting tape light is available in four output options: Lite, PRO, PRO II, PRO II, as well as RGB Color Changing or PRO Outdoor 24V & 12V systems." - "24V remote and plug-in transformers (Sold Separately) allow for multiple runs of tape. Please refer to total wattage of transformer divided by wattage per strip of tape when creating a layout. 60 Watt Remote Transformer: EN-2460-RB2-T, 100 Watt Remote Transformer: EN-24100-RB2-T, Plug-in Transformer: EN-2460-P-AR-T." - Smooth and continuous dimming to 10% with an electronic low voltage (ELV) dimmer. - "High Powered LED: Color Temperature: 2700K or 3000K, Rated Hours: 50,000, up to 135 Lumens per foot, Voltage: 24V." - Standards: UL and cUL Listed for damp locations. - Bulb Type: LED - Bulb Base: LED Module - Number Bulbs: 1 - Watts Per Bulb: 0.33 - Bulb(s) Included: Yes - Dimmable: Yes - Voltage: 24V - Color Temperature: 3000K - CRI: 85 - Lumens: 22.5 - Delivered Lumens: 22.5 - Beam Spread: Flood Degree - Lifetime: 50000 Hour Light Fixture
