2.5W - Flexline LED Line Voltage Strip Light 6in 3500K - Flexline Strip Light is the perfect solution for illuminating a task or cove application. Untethered without the need for a transformer Flexline can be wired directly to 120V with a maximum run of 150 feet. Ultra thin profile with optimized connectors to maximize consistency between lighting connections. Flexline is available in a variety of sizes and color temperatures with a modular design to adapt to filed conditions. Suitable for indoor use with a UV resistant coating. Per UL safety standards line voltage strip lighting is not field cuttable. - White - Task & Cove - Flexline Line Voltage - Strip Light - Functional - Collection: Flexline - Material: Silicone - Reversible: No - Height: 0.38" - Length: 6" - Width: 0.63" - Ultra thin profile at 5/8in W x 3/8in H with a modular design available in various lenghts to adapt to field conditions. - Optimized connectors for maximum consistency across connections. 150ft max run. - Four clip mounting options provided for a variety of surfaces and applications. - Smooth and continuous dimming to 10% with an electronic low voltage (ELV) dimmer. - "High Powered LED: Color Temperatures available: 2700K, 3000K, or 3500K Rated Hours: 50,000, Voltage: 120V, Power 5W/ft." - "Standards: ETL, cETL Listed for damp locations, suitable for indoor use only." - Bulb Type: LED - Bulb Base: LED Module - Number Bulbs: 1 - Watts Per Bulb: 2.5 - Bulb(s) Included: Yes - Dimmable: Yes - Voltage: 120V - Color Temperature: 3500K - CRI: 90 - Lumens: 250 - Delivered Lumens: 250 - Beam Spread: 128 Degree - Lifetime: 50000 Hour Light Fixture

144in Extension Cable for InvisiLED 24V Tape Light in White - Connectors and accessories for WAC Lighting InvisiLED 24V Tape Light including LITE PRO PRO II PRO III and RGB Color Changing Task & Cove Tape Light. - White - Accessories - Tape Light - Connector - Functional - Collection: InvisiLED - Material: Plastic - Reversible: Yes - Height: 0.88" - Length: 144" - Width: 0.88" - Connects from the transformer to the beginning run of InvisiLED 24V Tape Light. - Can be used to easily customize your design layout. - Total run length cannot exceed transformer load. - Use when the transformer is located far away from the beginning of a run. - "To be used with WAC Lighting InvisiLED 24V Tape Light including LITE, PRO, PRO II, PRO III, and RGB Color Changing Task & Cove Tape Light." - Standards: UL & cUL Listed for Damp Locations. - Voltage: 24V Light Fixture

12in Lead Wire for InvisiLED 24V Transformer to Tape Light in White - Connectors and accessories for WAC Lighting InvisiLED 24V Tape Light including LITE PRO PRO II PRO III and RGB Color Changing Task & Cove Tape Light. - White - Accessories - Tape Light - Connector - Functional - Collection: InvisiLED - Material: Plastic - Reversible: Yes - Height: 0.88" - Length: 12" - Width: 0.88" - Alternative length of lead wires for plug-in or remote power supply. - Replaces 6ft lead wire provided with standard transformer. - "May be field cut on field, for use with a remote power supply." - Available in a 2in and 12in size. - "To be used with WAC Lighting InvisiLED 24V Tape Light including LITE, PRO, PRO II, PRO III, and RGB Color Changing Task & Cove Tape Light." - Standards: UL & cUL Listed for Damp Locations. - Voltage: 24V Light Fixture

Endurance Photo Sensor in Back - The Endurance wall pack collection features a patent pending design for water and dust proofing encased in an IP66 rated factory sealed light engine. Thermally engineered for up to 100 000 hours of rated life the Endurance virtually eliminates any need for maintenance once installed. LED technology offers superior alternatives to conventional Halogen and HID sources. With factory sealed die cast aluminum housings the Endurance collection is sure to provide lasting worry free performance for years. - Black - Wall Lighting - Accessories - Photo Sensor - Contemporary - Collection: Endurance - Material: Die Cast Aluminum - Reversible: Yes - Height: 16.5" - Length: 4.5" - Width: 16.5" - "Optional sensor compatible with any Endurance Fin, Hawk or Flood Flood/Security Light" - "Automatic shut-off by day, and on by night." - Anti interference delay of 30 seconds. - "Easy to install, instructions included in packaging." - Sensitivity levels: 8-15 foot candles turns the fixture on. - Standards: ETL & cETL Listed IP65 for Wet locations. - Dimmable: Yes - Voltage: 120V Light Fixture

Endurance Photo Sensor in Architectural Bronze - The Endurance wall pack collection features a patent pending design for water and dust proofing encased in an IP66 rated factory sealed light engine. Thermally engineered for up to 100 000 hours of rated life the Endurance virtually eliminates any need for maintenance once installed. LED technology offers superior alternatives to conventional Halogen and HID sources. With factory sealed die cast aluminum housings the Endurance collection is sure to provide lasting worry free performance for years. - Architectural Bronze - Accessories - Outdoor Wall Lighting - Flood Light - Contemporary - Collection: Endurance - Material: Die Cast Aluminum - Reversible: Yes - Height: 14.25" - Length: 4" - Width: 14.25" - "Optional sensor compatible with any Endurance Fin, Hawk or Flood Flood/Security Light" - "Automatic shut-off by day, and on by night." - Anti interference delay of 30 seconds. - "Easy to install, instructions included in packaging." - Sensitivity levels: 8-15 foot candles turns the fixture on. - Standards: ETL & cETL Listed IP65 for Wet locations. - Dimmable: Yes - Voltage: 120V Light Fixture

Endurance Photo Sensor in Architectural Graphite - The Endurance wall pack collection features a patent pending design for water and dust proofing encased in an IP66 rated factory sealed light engine. Thermally engineered for up to 100 000 hours of rated life the Endurance virtually eliminates any need for maintenance once installed. LED technology offers superior alternatives to conventional Halogen and HID sources. With factory sealed die cast aluminum housings the Endurance collection is sure to provide lasting worry free performance for years. - Architectural Graphite - Accessories - Outdoor Wall Lighting - Flood Light - Contemporary - Collection: Endurance - Material: Die Cast Aluminum - Reversible: Yes - Height: 16.5" - Length: 4.5" - Width: 16.5" - "Optional sensor compatible with any Endurance Fin, Hawk or Flood Flood/Security Light" - "Automatic shut-off by day, and on by night." - Anti interference delay of 30 seconds. - "Easy to install, instructions included in packaging." - Sensitivity levels: 8-15 foot candles turns the fixture on. - Standards: ETL & cETL Listed IP65 for Wet locations. - Dimmable: Yes - Voltage: 120V Light Fixture

Endurance Photo Sensor in Architectural White - The Endurance wall pack collection features a patent pending design for water and dust proofing encased in an IP66 rated factory sealed light engine. Thermally engineered for up to 100 000 hours of rated life the Endurance virtually eliminates any need for maintenance once installed. LED technology offers superior alternatives to conventional Halogen and HID sources. With factory sealed die cast aluminum housings the Endurance collection is sure to provide lasting worry free performance for years. - Architectural White - Accessories - Outdoor Wall Lighting - Flood Light - Contemporary - Collection: Endurance - Material: Die Cast Aluminum - Reversible: Yes - Height: 16.5" - Length: 4.5" - Width: 16.5" - "Optional sensor compatible with any Endurance Fin, Hawk or Flood Flood/Security Light" - "Automatic shut-off by day, and on by night." - Anti interference delay of 30 seconds. - "Easy to install, instructions included in packaging." - Sensitivity levels: 8-15 foot candles turns the fixture on. - Standards: ETL & cETL Listed IP65 for Wet locations. - Dimmable: Yes - Voltage: 120V Light Fixture

9W - Lotos 4in LED Round Remodel Kit 3000K in White - Shallow profile LED that is designed to fit in tight ceiling spaces without sacrificing illumination or light output. Available in 4in or 6in downlight or adjustable. - White - Recessed Downlights - Complete Unit - "4"" Line Voltage" - Functional - Collection: Lotos - Material: Aluminum - Reversible: No - Height: 4.73" - Length: 4.73" - Width: 0.9" - "Multiple LED array for uniform illumination. Rotatable multi-axis gimbal ring. Slim, round 4in adjustable remodel downlights. Available in 4in & 6in sizes. 6ft extension cable (Part # RER-6) is available to increase distance from driver to downlight. New construction frame-in kit (Part # RER-FRAME) can be used for new construction applications." - Overall recessed downlight height with driver is less than 1.25 inches designed to fit in the tightest spaces. Construction: Steel with translucent diffuser. Heavy gauge retention clips secures fixture to ceiling. - Replaceable driver is contained in a steel housing with space for line-voltage electrical connections. Driver includes a 6in low voltage plug-and-play connector that connects to the downlight. - Smooth and continuous dimming with an electronic low voltage (ELV) or TRIAC dimmer. - "High Powered Replaceable LED Module CRI: 90, Rated Hours: 50000, Color Temp: 3000K." - Standards: ETL & cETL listed for Wet Locations. - Bulb Type: LED - Bulb Base: LED Module - Universal Driver - Number Bulbs: 1 - Watts Per Bulb: 9 - Bulb(s) Included: Yes - Dimmable: "ELV, TRIAC" - Voltage: 120-240-277V - Color Temperature: 3000K - CRI: 90 - Lumens: 688 - Delivered Lumens: 550 - Beam Spread: Flood Degree - Lifetime: 50000 Hour Light Fixture

144in Extension Cable for Line and Straight Edge - Connectors for WAC Lighting Line Line 2.0 and Straight Edge under cabinet fixtures. I connectors are used to join two fixtures for a seamless end to end connection. Jointer cables are used to join one fixture to another on a single power source available in four sizes 6in 12in 24in and 36in. Use an SL IF custom extender to create longer runs of joiner cables. Y and X connectors are used to create three way and four way connections. 144in extension cable is used to supply power to fixture from a far power supply. - White - Accessories - Line - Connector - Functional - Collection: Line - Material: Plastic - Reversible: Yes - Height: 1.13" - Length: 144" - Width: 1.13" - Use 144in extension cable for long runs between supply power to fixture. - Easy to install for power continuity. - "To be used with WAC Lighting Line, Line 2.0, and Straight Edge under cabinet fixture." - "One side is an open splice for power supply, the other has a quick connect jack for Line, Line 2.0 and Straight Edge fixture." - "Connect up to a number of fixtures allowed by the power supply used. For example, 100Watt power supply can support 10 X 10Watt fixtures." - Standards: UL & cUL Listed for Damp Locations. - Voltage: 24V Light Fixture

Mini Accent Snoot for Glare Reduction in Black - This Accent snoot reduces glare by increasing the cutoff angle for light. - Black - Landscape Lighting - Accessories - Mounting Accessory - Contemporary - Collection: WAC Landscape - Material: K-Alloy Aluminum - Reversible: No - Height: 2.38" - Length: 2.38" - Width: 2.38" - Available in a bronze finish. - K-Alloy Aluminum and Solid Brass construction (BBR) offers enhanced protection against outdoor elements. - "Available for the Mini, Standard, and Large Accent Lights. Make sure to specify the correct size snoot." - Thumb screw included to hold cowl into place. - 8 inches long. - Standards: UL & cUL 1838 and IP68 Rated for Wet and Submersible Locations. Light Fixture