3W - LEDme Miniature Round Recessed Adjustable Task Light 3000K Soft White in White - Perfect for ceilings under cabinet and wall niches. LED Miniature Recessed Downlights offer a super low profile and die cast aluminum trim with a 25 degree cutoff angle for comfortable general and task lighting. - White - Task & Cove - Miniature Recessed - Miniature Recessed - Contemporary - Collection: LEDme Miniature Recessed - Material: Die Cast Aluminum - Reversible: No - Height: 3" - Length: 2.75" - Width: 2.75" - "Die cast aluminum construction trim, available in multiple finish options. Black solid steel housing included. LED lamp and insulated wires are pre-installed within housing, wires lead out through the side of the housing for connection to remote driver." - "Two heavy gauge inner retention clips push out onto mounting surface to firmly hold fixture in place. Accommodates surface up to 3/4in thickness and 2.5in cutout. Approved for use in non-IC ceiling applications. Sold as new construction, may be re-configured as a remodel on the field." - "Remote (LD-700MA03-EDIM-IS, or LD-700MA09-EDIM-IS)or plug-in (LED-700MA12-P) driver required and sold separately. Up to 3 fixtures can be installed on a 9W remote driver. Available in adjustable, Downlight, round, and square trims." - Smooth and continuous dimming to 10% with an electronic low voltage (ELV) dimmer. - "High Powered LED: Color Temperature: 2700K, 3000K, 3500K, or 4500K, Rated Hours: 100,000, Voltage: 12V, Power 3W, comparable to a 20W MR11." - "Standards: UL, cUL Listed for damp locations." - Bulb Type: LED - Bulb Base: LED Module - Number Bulbs: 1 - Watts Per Bulb: 3 - Bulb(s) Included: Yes - Dimmable: Yes - Voltage: 12V - Color Temperature: 3000K - CRI: 85 - Lumens: 160 - Delivered Lumens: 160 - Beam Spread: Narrow Degree - Lifetime: 100000 Hour Light Fixture

3W - LEDme Miniature Square Recessed Adjustable Task Light 4500K Cool White in Gunmetal - Perfect for ceilings under cabinet and wall niches. LED Miniature Recessed Downlights offer a super low profile and die cast aluminum trim with a 25 degree cutoff angle for comfortable general and task lighting. - Gunmetal - Task & Cove - Miniature Recessed - Miniature Recessed - Contemporary - Collection: LEDme Miniature Recessed - Material: Die Cast Aluminum - Reversible: No - Height: 3" - Length: 2.75" - Width: 2.75" - "Die cast aluminum construction trim, available in multiple finish options. Black solid steel housing included. LED lamp and insulated wires are pre-installed within housing, wires lead out through the side of the housing for connection to remote driver." - "Two heavy gauge inner retention clips push out onto mounting surface to firmly hold fixture in place. Accommodates surface up to 3/4in thickness and 2.5in cutout. Approved for use in non-IC ceiling applications. Sold as new construction, may be re-configured as a remodel on the field." - "Remote (LD-700MA03-EDIM-IS, or LD-700MA09-EDIM-IS)or plug-in (LED-700MA12-P) driver required and sold separately. Up to 3 fixtures can be installed on a 9W remote driver. Available in adjustable, Downlight, round, and square trims." - Smooth and continuous dimming to 10% with an electronic low voltage (ELV) dimmer. - "High Powered LED: Color Temperature: 2700K, 3000K, 3500K, or 4500K, Rated Hours: 100,000, Voltage: 12V, Power 3W, comparable to a 20W MR11." - "Standards: UL, cUL Listed for damp locations." - Bulb Type: LED - Bulb Base: LED Module - Number Bulbs: 1 - Watts Per Bulb: 3 - Bulb(s) Included: Yes - Dimmable: Yes - Voltage: 12V - Color Temperature: 4500K - CRI: 85 - Lumens: 200 - Delivered Lumens: 200 - Beam Spread: Narrow Degree - Lifetime: 100000 Hour Light Fixture

3W - LEDme Miniature Square Recessed Adjustable Task Light 4500K Cool White in White - Perfect for ceilings under cabinet and wall niches. LED Miniature Recessed Downlights offer a super low profile and die cast aluminum trim with a 25 degree cutoff angle for comfortable general and task lighting. - White - Task & Cove - Miniature Recessed - Miniature Recessed - Contemporary - Collection: LEDme Miniature Recessed - Material: Die Cast Aluminum - Reversible: No - Height: 3" - Length: 2.75" - Width: 2.75" - "Die cast aluminum construction trim, available in multiple finish options. Black solid steel housing included. LED lamp and insulated wires are pre-installed within housing, wires lead out through the side of the housing for connection to remote driver." - "Two heavy gauge inner retention clips push out onto mounting surface to firmly hold fixture in place. Accommodates surface up to 3/4in thickness and 2.5in cutout. Approved for use in non-IC ceiling applications. Sold as new construction, may be re-configured as a remodel on the field." - "Remote (LD-700MA03-EDIM-IS, or LD-700MA09-EDIM-IS)or plug-in (LED-700MA12-P) driver required and sold separately. Up to 3 fixtures can be installed on a 9W remote driver. Available in adjustable, Downlight, round, and square trims." - Smooth and continuous dimming to 10% with an electronic low voltage (ELV) dimmer. - "High Powered LED: Color Temperature: 2700K, 3000K, 3500K, or 4500K, Rated Hours: 100,000, Voltage: 12V, Power 3W, comparable to a 20W MR11." - "Standards: UL, cUL Listed for damp locations." - Bulb Type: LED - Bulb Base: LED Module - Number Bulbs: 1 - Watts Per Bulb: 3 - Bulb(s) Included: Yes - Dimmable: Yes - Voltage: 12V - Color Temperature: 4500K - CRI: 85 - Lumens: 200 - Delivered Lumens: 200 - Beam Spread: Narrow Degree - Lifetime: 100000 Hour Light Fixture

3W - LEDme Miniature Square Recessed Adjustable Task Light 3000K Soft White in Brushed Nickel - Perfect for ceilings under cabinet and wall niches. LED Miniature Recessed Downlights offer a super low profile and die cast aluminum trim with a 25 degree cutoff angle for comfortable general and task lighting. - Brushed Nickel - Task & Cove - Miniature Recessed - Miniature Recessed - Contemporary - Collection: LEDme Miniature Recessed - Material: Die Cast Aluminum - Reversible: No - Height: 3" - Length: 2.75" - Width: 2.75" - "Die cast aluminum construction trim, available in multiple finish options. Black solid steel housing included. LED lamp and insulated wires are pre-installed within housing, wires lead out through the side of the housing for connection to remote driver." - "Two heavy gauge inner retention clips push out onto mounting surface to firmly hold fixture in place. Accommodates surface up to 3/4in thickness and 2.5in cutout. Approved for use in non-IC ceiling applications. Sold as new construction, may be re-configured as a remodel on the field." - "Remote (LD-700MA03-EDIM-IS, or LD-700MA09-EDIM-IS)or plug-in (LED-700MA12-P) driver required and sold separately. Up to 3 fixtures can be installed on a 9W remote driver. Available in adjustable, Downlight, round, and square trims." - Smooth and continuous dimming to 10% with an electronic low voltage (ELV) dimmer. - "High Powered LED: Color Temperature: 2700K, 3000K, 3500K, or 4500K, Rated Hours: 100,000, Voltage: 12V, Power 3W, comparable to a 20W MR11." - "Standards: UL, cUL Listed for damp locations." - Bulb Type: LED - Bulb Base: LED Module - Number Bulbs: 1 - Watts Per Bulb: 3 - Bulb(s) Included: Yes - Dimmable: Yes - Voltage: 12V - Color Temperature: 3000K - CRI: 85 - Lumens: 160 - Delivered Lumens: 160 - Beam Spread: Narrow Degree - Lifetime: 100000 Hour Light Fixture

3W - LEDme Miniature Square Recessed Adjustable Task Light 3000K Soft White in Gunmetal - Perfect for ceilings under cabinet and wall niches. LED Miniature Recessed Downlights offer a super low profile and die cast aluminum trim with a 25 degree cutoff angle for comfortable general and task lighting. - Gunmetal - Task & Cove - Miniature Recessed - Miniature Recessed - Contemporary - Collection: LEDme Miniature Recessed - Material: Die Cast Aluminum - Reversible: No - Height: 3" - Length: 2.75" - Width: 2.75" - "Die cast aluminum construction trim, available in multiple finish options. Black solid steel housing included. LED lamp and insulated wires are pre-installed within housing, wires lead out through the side of the housing for connection to remote driver." - "Two heavy gauge inner retention clips push out onto mounting surface to firmly hold fixture in place. Accommodates surface up to 3/4in thickness and 2.5in cutout. Approved for use in non-IC ceiling applications. Sold as new construction, may be re-configured as a remodel on the field." - "Remote (LD-700MA03-EDIM-IS, or LD-700MA09-EDIM-IS)or plug-in (LED-700MA12-P) driver required and sold separately. Up to 3 fixtures can be installed on a 9W remote driver. Available in adjustable, Downlight, round, and square trims." - Smooth and continuous dimming to 10% with an electronic low voltage (ELV) dimmer. - "High Powered LED: Color Temperature: 2700K, 3000K, 3500K, or 4500K, Rated Hours: 100,000, Voltage: 12V, Power 3W, comparable to a 20W MR11." - "Standards: UL, cUL Listed for damp locations." - Bulb Type: LED - Bulb Base: LED Module - Number Bulbs: 1 - Watts Per Bulb: 3 - Bulb(s) Included: Yes - Dimmable: Yes - Voltage: 12V - Color Temperature: 3000K - CRI: 85 - Lumens: 160 - Delivered Lumens: 160 - Beam Spread: Narrow Degree - Lifetime: 100000 Hour Light Fixture

3W - LEDme Miniature Square Recessed Adjustable Task Light 3000K Soft White in White - Perfect for ceilings under cabinet and wall niches. LED Miniature Recessed Downlights offer a super low profile and die cast aluminum trim with a 25 degree cutoff angle for comfortable general and task lighting. - White - Task & Cove - Miniature Recessed - Miniature Recessed - Contemporary - Collection: LEDme Miniature Recessed - Material: Die Cast Aluminum - Reversible: No - Height: 3" - Length: 2.75" - Width: 2.75" - "Die cast aluminum construction trim, available in multiple finish options. Black solid steel housing included. LED lamp and insulated wires are pre-installed within housing, wires lead out through the side of the housing for connection to remote driver." - "Two heavy gauge inner retention clips push out onto mounting surface to firmly hold fixture in place. Accommodates surface up to 3/4in thickness and 2.5in cutout. Approved for use in non-IC ceiling applications. Sold as new construction, may be re-configured as a remodel on the field." - "Remote (LD-700MA03-EDIM-IS, or LD-700MA09-EDIM-IS)or plug-in (LED-700MA12-P) driver required and sold separately. Up to 3 fixtures can be installed on a 9W remote driver. Available in adjustable, Downlight, round, and square trims." - Smooth and continuous dimming to 10% with an electronic low voltage (ELV) dimmer. - "High Powered LED: Color Temperature: 2700K, 3000K, 3500K, or 4500K, Rated Hours: 100,000, Voltage: 12V, Power 3W, comparable to a 20W MR11." - "Standards: UL, cUL Listed for damp locations." - Bulb Type: LED - Bulb Base: LED Module - Number Bulbs: 1 - Watts Per Bulb: 3 - Bulb(s) Included: Yes - Dimmable: Yes - Voltage: 12V - Color Temperature: 3000K - CRI: 85 - Lumens: 160 - Delivered Lumens: 160 - Beam Spread: Narrow Degree - Lifetime: 100000 Hour Light Fixture

18W Dimmable Constant Current LED Power Supply - Input: 120V / 50-60Hz - Output: 700mA, 19W Max - 2.5" x 1.5" x 1"

9W - Remote Enclosed Electronic Transformer 0.7A 120V Input 12V Output 9 Watt - This LEDme class 2 low voltage electronic transformer is designed for use with a WAC Lighting under cabinet and recessed lighting products. A Class 2 enclosed electronic transformer is the perfect solution for wiring multiple low voltage fixtures. Class 2 transformers are intrinsically safer transformers because they are compartmentalized to allow no greater than 5 amps of current to be drawn on each compartment. Enclosure cover is easy to remove. Secondary wiring for class 2 transformers do not require conduit sheathed cable or clamp wiring techniques. This transformer has a low minimum load requirement of 1W to allow the use of LED products. May be dimmed using an electronic low voltage dimmer. - Black - Accessories - Transformer - 12V Remote - Functional - Collection: Transformer - Material: Die Cast Aluminum - Reversible: Yes - Height: 1.75" - Length: 3.13" - Width: 7.25" - "Soft start, short and overload circuit protection features. For use with WAC Lighting low voltage under cabinet and recessed lighting systems. Transformers that end with -S include a lead wire for Line and Straight Edge under cabinet systems, and those that end with -T include a lead wire for InvisiLED 24V Tape Light systems." - "1W Minimum load to support low load LED systems. Intrinsically safe, Class 2 transformers permit no greater than a 5 amp current to be drawn." - Secondary wiring for Class 2 transformers does not require conduit sheathed cable or clamp wiring techniques. Non-metallic sheathed cable may be used for secondary wiring in walls and ceilings. - "Input Voltage: 120V AC, Output Voltage: 12V AC, loads vary based on transformer 3W and 9W." - Smooth and continuous dimming with an electronic low voltage dimmer. Dimmers should always be installed on the primary side of the transformer. - "Standards: Class 2, UL & cUL Listed for Damp Locations." - Bulb(s) Included: No - Dimmable: Yes - Voltage: 120V Light Fixture