2W 120 DEGREE BEAM ANGLE 5 FOOT LED TAPE LIGHT GREEN 12V AC/DC - GREEN - Length: 5' - Each unit has fixed male and female connectors on each end. Requires a minimum run length of 1 feet, and are limited to a maximum run of 25 feet per 60W Class 2 power supply - Tape may be cut to length as indicated by the marking on the back of the INVISILED® section - Cut sections may not be rejoined to start a new section and must be sealed with silicon after adding an end cap

2W 120 DEGREE BEAM ANGLE 5 FOOT LED TAPE LIGHT RED 12V AC/DC - RED - Length: 5' - Each unit has fixed male and female connectors on each end. Requires a minimum run length of 1 feet, and are limited to a maximum run of 25 feet per 60W Class 2 power supply - Tape may be cut to length as indicated by the marking on the back of the INVISILED® section - Cut sections may not be rejoined to start a new section and must be sealed with silicon after adding an end cap

Male to Male INVISLED Tape Light Connector

2W 12V 120 DEGREE BEAM ANGLE LED 2 INCH SECTION W/MALE AND FEMALE - WHITE - Length: 2" - Each unit has fixed male and female connectors on each end. Requires a minimum run length of 1 feet, and are limited to a maximum run of 25 feet per 60W Class 2 power supply - Tape may be cut to length as indicated by the marking on the back of the INVISILED® section - Cut sections may not be rejoined to start a new section and must be sealed with silicon after adding an end cap

1 FEET LED TAPE LIGHT WHITE 2W 12V AC/DC 120 DEGREE BEAM ANGLE - WHITE - Length: 1" - Each unit has fixed male and female connectors on each end. Requires a minimum run length of 1 feet, and are limited to a maximum run of 25 feet per 60W Class 2 power supply - Tape may be cut to length as indicated by the marking on the back of the INVISILED® section - Cut sections may not be rejoined to start a new section and must be sealed with silicon after adding an end cap

2W 120 DEGREE BEAM ANGLE 5 FOOT LED TAPE LIGHT WHITE 12V AC/DC - WHITE - Length: 5' - Each unit has fixed male and female connectors on each end. Requires a minimum run length of 1 feet, and are limited to a maximum run of 25 feet per 60W Class 2 power supply - Tape may be cut to length as indicated by the marking on the back of the INVISILED® section - Cut sections may not be rejoined to start a new section and must be sealed with silicon after adding an end cap

2W 12V 120 DEGREE BEAM ANGLE LED 12 INCH SECTION W/MALE AND FEMALE - WHITE - Length: 1" - Each unit has fixed male and female connectors on each end. Requires a minimum run length of 1 feet, and are limited to a maximum run of 25 feet per 60W Class 2 power supply - Tape may be cut to length as indicated by the marking on the back of the INVISILED® section - Cut sections may not be rejoined to start a new section and must be sealed with silicon after adding an end cap

1 FEET LED TAPE LIGHT AMBER 2W 12V AC/DC 120 DEGREE BEAM ANGLE - AMBER - Length: 1" - Each unit has fixed male and female connectors on each end. Requires a minimum run length of 1 feet, and are limited to a maximum run of 25 feet per 60W Class 2 power supply - Tape may be cut to length as indicated by the marking on the back of the INVISILED® section - Cut sections may not be rejoined to start a new section and must be sealed with silicon after adding an end cap

2W 12V 120 DEGREE BEAM ANGLE LED 2 INCH SECTION W/MALE AND FEMALE - AMBER - Length: 2" - Each unit has fixed male and female connectors on each end. Requires a minimum run length of 1 feet, and are limited to a maximum run of 25 feet per 60W Class 2 power supply - Tape may be cut to length as indicated by the marking on the back of the INVISILED® section - Cut sections may not be rejoined to start a new section and must be sealed with silicon after adding an end cap

2W 12V 120 DEGREE BEAM ANGLE LED 2 INCH SECTION W/MALE AND FEMALE - WHITE - Length: 2" - Each unit has fixed male and female connectors on each end. Requires a minimum run length of 1 feet, and are limited to a maximum run of 25 feet per 60W Class 2 power supply - Tape may be cut to length as indicated by the marking on the back of the INVISILED® section - Cut sections may not be rejoined to start a new section and must be sealed with silicon after adding an end cap