Toll Free: 1-888-988-9220

M-F 8am-5pm (EST)

Search Our Products:
FREE Standard Shipping on Orders $100 or More!

Home » Invisiled Tape WAC Lighting » INVISILED Tape Lights WAC Lighting » INVISILED Classic 24V Indoor WAC Lighting » INVISILED Classic 24V Indoor Accessories WAC Lighting

 Checkout

Search within this category

SKU
Name
Image
Desc
Brand
Price
Qty
END CAP FOR 24V INVISILED ™ - Included 1 cut end cap and 1 male end cap - Use to terminate every run to protect against contaminants
 
 
12" JOINER CABLE - Connects two sections of INVISILED
 
 
2" JOINER CABLE - Connects two sections of INVISILED
 
 
6" JOINER CABLE - Connects two sections of INVISILED
 
 
72" JOINER CABLE - Connects two sections of INVISILED
 
 
LED TAPE LIGHT MOUNTING CLIPS - Width: 1/2" - Mounting clips are recommended for installing INVISILED on porous or uneven surfaces that are difficult to permanently adhere the sections solely using its self-adhesive backing - 2 mounting clips per foot are recommended for straight runs - More may be necessary for curve or where 2 inch sections are used - Quantity 10 pieces per package
 
 
L CONNECTOR FOR 24V INVISILED™ - L connector has male and female connectors and is used to create 90 degree right angles - Polarity is not a factor
 
 
X CONNECTOR FOR 24V INVISILED™ - Length: 3 1/16" - Width: 3 1/16" - Height: 5/16" - X connector has one male and three female connectors and can be used to easily customize your design layout
 
 
Y CONNECTOR FOR 24V INVISILED™ - Y Connector has one male and two female connectors and can be used to easily customize your design layout
 
 
LED TAPE LIGHT RETROFIT CHANNEL - Length: 36" - Width: 2" - Height: 2" - Retrofit channels are used to construct a miniature cove ore light baffle in which INVISILED may be concealed - INVISILED may also be mounted to the channel as a qay to change the direction of the projected light - The channel has a 3/32" slot every 1 inch and can be curved at a radius of 52 inches or greater - 2 inch screws are provided